D-Link DSL-564T, Руководство пользователя

Страница: 59 / 87

DSL-564T ADSL Router User
’
s Guide
47
Static Routing
Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN.
This is used to specify that all packets destined for a particular network or subnet use a predetermined gateway.
Figure 4-11. Static Routing menu
To add a static route, choose a connection from the pull-down menu and then enter a New Destination IP
address, subnet Mask , Gateway IP address and Metric value. Click Apply to enter the new static route in the
table below. The route becomes active immediately upon creation.
To remove a static route from the table in the bottom half of the window, choose to Delete it from the table and
click the Apply button. Remember to save the configuration changes.