DSL-564T ADSL Router User
’
s Guide
19
To configure the WAN connection for PPPoA, perform the steps listed below. Some of the settings do not need
to be changed the first time the device is set up, but can be changed later if you choose.
Figure 3- 5. PPPoA Connection 1 Setup menu
To configure the default connection type (PPPoA) for Connection 1, follow the steps listed below. To change the
connection type of Connection 1 to an alternative type follow the instructions according to the desired type as
described below in Change the Connection Type.
1. Click the
Connection 1
button under
WAN Setup
to view the
PPPoA Connection Setup
menu
pictured in the example above.
2. Type in a
Name
for the connection or use the default name
conn_1_PPPoA_8_35
in the space provided.
3. Under
Options
, enable
NAT
and/or
Firewall
by selecting the corresponding selection box.
4. If you are told to change the
VPI
or
VCI
values, type in the values given to you by your service
provider. Many users will be able to use the default settings.
5. Leave the default
QoS
values if you are unsure or the ISP did not provide this information.
6. Do not change the
PCR
or
SCR
values unless you are required to do so. If you are told to change these,
type in the values given to you by your service provider.
7. Type the
Username
and
Password
used to verify the identity of your account. Typically, the Username
is an account number assigned by your ISP and appears in the form
account#@serviceprovider.com
,
while the Password may have been chosen by the account holder. For most users, the remaining settings
will not need to be changed. See your ISP for further information.
Содержание DSL-564T
Страница 1: ...DSL 564T ADSLRouter User sGuide April 2004 ...
Страница 87: ......
