DSL-302G ADSL Modem User’s Guide
Adding to the DHCP Server Pool
Click
Add
, the DHCP Server Pool – Add page will be displayed, as below.
DHCP Server – Add Parameters
To Add DHCP server parameters define the following:
Start IP Address
Type in the base address for the IP pool of unassigned IP addresses.
End IP Address
Type in the last address of the contiguous IP address range to be used by
the Modem for DHCP function.
Mac Address
A MAC address is the series ID unique for each device on a network. Use
this field only if you want to assign a specific IP address to the computer
that uses this MAC address. If you type a MAC address here, you must
have specified the same IP address in both the Start IP Address and End
IP Address fields.
NetMask
Type in a subnet mask IP address.
Domain Name
Enter a domain name for the network group or leave blank.
Gateway Address
Type in the Default Gateway IP Address that will be assigned to and used
by the DHCP clients.
DNS Address
Enter any Internet DNS server IP address available through the WAN
connection or use the DNS settings supplied by your service provider.
SDNS Address
Enter a backup DNS IP address or leave blank.
WINS Address
Some LANs may require using WINS servers, enter the IP address of the
WINS server or leave blank.
SWINS Address
Enter a back-up WINS server IP address or leave blank.
Click the Submit button to save the settings in temporary memory. When you are done making changes to the
configuration settings, open the
Commit & Reboot
menu and click the Commit button to save your changes to
permanent memory.
33
