DSL-302G ADSL Modem User’s Guide
Next, you need to confirm that Network Address Translation (NAT) is enabled on the modem. Open the
WAN
folder (if it is not already open) and click on the
NAT
link. This will open the
Network Address Translation
(NAT) Configuration
menu, as shown below.
Click the
Enable
click-box, and then click the
Submit
button to make the change current.
Finally, you will need to open the
Admin
folder and then click on the
Save & Reboot
link to open the
Save &
Reboot
menu, and finally click the
Save
button to enter the settings into the modem’s permanent memory.
You will need to set your computer to
Obtain IP address automatically
to connect to your ADSL service
provider’s network and the Internet. Instructions about how to do this are included earlier in this DSL-302G
User’s Guide, if you do not know how.
26
