D-Link DSL-2640BT, Руководство пользователя

Страница: 65 / 88

Web Configuration
D-Link DSL-2640BT User Manual
61
Click Add and the page as shown in the figure appears.
The table describes the parameters in this page.
Field Description
Traffic Class Name Enter the name of the traffic class.
Assign Classification
Queue Specify the queue to which the packet belongs. You can
set the queue in the classification configuration.
DSCP Mark Attach the DSCP mark to the mapped packet.
Physical LAN Port
Select the physical port of the packet from the drop-down
list.
Source MAC Address Enter the source MAC address of the packet.
Source MAC Mask
Use mask 000000ffffff to mask the MAC address. 00
indicates not mapped and ff indicates mapped.
Destination MAC
Address
Enter the destination MAC address of the packet.
Destination MAC
Mask Use mask 000000ffffff to mask the MAC address. 00
indicates not mapped and ff indicates mapped
802.1p Priority
Select the 802.1p priority of the packet from the
drop-down list. You can select
Any or a value in the range
of 0—7. Note that this function is not supported at the
moment.
Click
Apply to save the settings.