D-Link DSL-2640BT, Руководство пользователя, Страница: 10 / 88

Installation
D-Link DSL-2640BT User Manual
6
device, not in the Router itself.
If your ADSL service is delivered through a PPPoE or PPPoA connection, the information needed to establish and maintain the Internet connection can be stored in the
Router. In this case, it is not necessary to install software on your computer. It may however be necessary to change some settings in the device, including account
information used to identify and verify the connection.
All connections to the Internet require a unique global IP address. For bridged connections, the global IP settings must reside in a TCP/IP enabled device on the LAN
side of the bridge, such as a PC, a server, a gateway device such as a router or similar firewall hardware. The IP address can be assigned in a number of ways. Your
network service provider will give you instructions about any additional connection software or NIC configuration that may be required.
Wireless LAN
Computers using the Wireless network can access the Internet or use the embedded 802.1g wireless access point. Wireless workstations must have an 802.1g or
802.1b wireless network card installed to use the Wireless ADSL Router. In addition the workstations must be configured to operate on the same channel and SSID as
the Wireless ADSL Router. If wireless security is used, the wireless workstations must be properly configured for the security settings used.