DSL-2540U
ADSL/Ethernet Router with Built-in Switch
User Manual
Configuring via Web-based Interface
Figure 65. The page for adding a rule for IP filtering.
You can specify the following parameters:
Parameter
Description
IP filter rule editing
Name
A name for the rule for easier identification.
Protocol
A protocol for network packet transmission. Select a value from the
drop-down list. To apply the rule to all protocols from the list, select
the
<All>
value (when this value is selected, the
Ports
section is not
displayed).
Action
Select an action for the rule.
ACCEPT
: Allows packet transmission in accordance with the
criteria specified by the rule.
DROP
: Denies packet transmission in accordance with the criteria
specified by the rule.
IP Addresses
IP address range
Select the checkbox if you want to specify a range of IP addresses as
the source or destination IP address.
Page
69
of 86
