DSL-2540U
ADSL/Ethernet Router with Built-in Switch
User Manual
Installation and Connection
Connecting to Web-based Interface
When you have configured your computer, you can access the web-based interface and configure
needed parameters (for example, create an interface to connect to the Internet, specify the settings
of the firewall, edit the password for the administrator account, etc.)
1. Start a web browser (see the
2. In the address bar of the web browser, enter the IP address of the router (by default, the
following IP address is specified:
192.168.1.1
). Press the
Enter
key.
Figure 11. Connecting to the web-based interface of the DSL-2540U device.
3. On the opened page, enter the username (login) and password for the administrator account
(by default, the following username and password are specified:
admin
,
admin
). Then
click the
Enter
link.
Figure 12. The login page.
!
If the error “
The page cannot be displayed
” (or “
Unable to display the page
”/“
Could not
connect to remote server
”) occurs upon connecting to the web-based interface of the router,
make sure that you have properly connected the router to your computer.
!
For security reasons, it is strongly recommended to change the administrator password
upon initial configuration of the router. To do this,
click the
Configure manually
button
and
proceed to the
System / Administrator password
page.
Page
21
of 86
