51
D-Link DSL-226 User Manual
Section 4 - Configuration
Advanced Settings
Hide SSID:
The default setting is
Disabled
. Select
Enabled
if you do not want to
broadcast the Wi-Fi name or SSID of your wireless network.
WMM:
Enable or disable Wi-Fi Multimedia Quality of Service (WMM QoS) for
your wireless network. This can help to improve the quality of video
and voice applications for your wireless clients. The default is enabled.
Signal-Interval:
Set the rate at which your wireless network is advertised. The range
is 20 -1000 and default is
100
milliseconds.
DTIM:
Specify the Delivery Traffic Information Map (DTIM) message interval.
Higher DTIM values can help conserve power at the cost of slight
latency. The range is 1-255 and default is 1.
Transmitting
Power:
Select the desired wireless transmission power. The available options
are
100%
,
50%, 25%,
or
12.5%
. The default is
100%
.
Threshold for
fragmentation:
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte threshold will be fragmented before transmission. The range is
256-2346
and
2346
is the default setting.
802.11 Mode:
Select the desired wireless networking standard(s) to use. The
available options are
11B only, 11G only, Mixed 11G/B, 11N only,
Mixed 11G/N,
and
Mixed 11N/G/B.
Channel Width:
Channel Width is available if you selected
11N, Mixed 11G/N,
or
Mixed 11N/G/B
for
802.11 Mode
. Select
20/40
if you are using
both of 802.11g/b and 802.11n devices or select
20 MHz
if you want
to disable 40 MHz bandwidth communication. The recommended
setting is
20/40
.
Advanced Settings (continued)
