52
D-Link DSL-226 User Manual
Section 4 - Configuration
20/40 MHz Co-
Exist:
Enable or disable the existence of both 20 MHz and 40 MHz channel
width. Keep it enabled to achieve the maximum operability of wireless
products using different standards in your environment. However,
it might prevent your 802.11n devices from reaching the maximum
performance.
Short Guard
Interval :
This option is available for 11N wireless standard. This increases data
rate by lowering the guard interval to 400 ns. The default is enabled.
Channel:
Select the desired channel for your wireless network to use. The
default is
Auto
(recommended).
Preamble Type:
This defines the length of the CRC block for communication between
the wireless router and the devices. Ensure that all your wireless
devices use the same type. Select
Enabled
to set it to short and
Disabled
to set it to long.
Schedule :
Use the drop-down menu to select the time schedule for which the
wireless network will be available. The schedule may be set to
Always
,
or you can create your own schedules in the Schedule section. Refer
for more information.
WI-FI PROTECTED SETUP
The easiest way to connect your wireless devices to your device is with Wi-Fi
Protected Setup (WPS).
Start WPS:
Press this button to establish a connection with another WPS
compatible device. Note that the WPS only works with WPA2 security
method.
Click
Save
when you are done.
Advanced Settings (continued)
