DSA-3110 Hotspot Edition – User Manual
Network Address Translation
Proceed to the
Address translation
page to configure the NAT (Network Address Translation)
function.
This page is used to declare subnets which require address translation. A physical interface used for
translating a network is selected automatically on the basis of network settings configured on the
Net > Network interfaces
page.
The
Off
button is used to completely disable the NAT function in the device.
The
Factory
button is used to restore the default setting of the NAT function.
By default, the NAT function is enabled for the following networks: 192.168.1.0/24,
192.168.0.0/24, 10.0.0.0/8.
To modify the NAT settings, do the following:
•
Open the
Net > Address translation
page.
•
Click the
Edit
button.
Picture 23. The
Net > Address translation
page.
•
Enter the slash-separated pair of the subnet and subnet mask. The subnet mask can be
entered in the common (4-octet) format (e.g., 255.255.255.0) or in so called variable-length
subnet mask (VLSM) format (e.g., /16 corresponds to 255.255.0.0, /24 – to 255.255.255.0, /
30 – to 255.255.255.252, etc.).
•
Click the
Save
button.
Page 24 of 61
