DSA-3110 Hotspot Edition – User Manual
Interface type
The type of configuration for this interface (PPPoE).
Connection
A name of the connection for easier identification.
Optional
.
Interface
The name of the device physical interface, to which the configured
PPPoE interface will be assigned.
Username
The login to register on the PPPoE server.
Password
The password to register on the PPPoE server.
Access concentrator name
The name of the provider’s PPPoE server.
Service name
The name of the service on the provider’s PPPoE server.
Optional.
Default route
Select this checkbox to use the IP address of the server as the
default route (the destination address for all IP packets, which
routes have not been found).
Metric
The parameter is used to assign a priority for this connection. The
lower the value, the higher is the priority.
Start
Select a radio button to enable or disable the interface auto-start
upon the load of the device.
Click the
Save
button.
Applying/Returning Configuration of Network/P-T-P Interfaces
When you have modified the settings of physical interfaces, added p-t-p interfaces or modified the
settings of p-t-p interfaces, a page displaying the newly created
configuration of interfaces opens.
On this page you can save the new configuration by clicking the
Apply
button or reject the
configuration by clicking the
Delete
button.
Picture 16. Saving the changes of configuration.
Page 19 of 61
