75
D-Link DIR-890L User Manual
Section 3 - Configuration
Admin
This page allows you to change the administrator (Admin) settings, like reset the Admin password and enable remote management.
From the
Management
menu, click
System Admin
.
Enter a new
Password
for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Enables a challenge-response test designed to prevent online hackers
and unauthorized users from gaining access to your router’s network
settings.
Check to enable HTTPS to connect to the router securely. This means
to connect to the router, you must enter
https
://192.168.0.1
instead
of
http
://192.168.0.1
.
Remote management allows the DIR-890L to be configured from the
Internet by a web browser. A password is still required to access the web
management interface.
The port number used to access the DIR-890L is used in the URL.
Example:
http://x.x.x.x:8080
where x.x.x.x is the Internet IP address
of the DIR-890L and 8080 is the port used for the web management
interface. If you enable
HTTPS Server,
you must enter
https://
as part
of the URL to access the router remotely.
Click
Save
when you are done.
Password:
Enable
Graphical
Authentication
(CAPTCHA):
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin
Port:
To load, save, or reset the settings, or to reboot the router, click
System
and refer to page 76.
