51
D-Link DIR-890L User Manual
Section 3 - Configuration
Wireless
Smart Connect
Enable Smart Connect to allow the router to automatically assign your wireless clients to the best available wireless band. When enabled, the 2.4GHz
and both 5GHz bands will have the same Wi-Fi name and password.
From the
Settings
menu, click
Wireless
to begin wireless configuration. You will see the
Wi-Fi Name (SSID)
and
Password
for both the 2.4GHz and
5GHz bands. Click
Advanced Settings...
to expand the list and allow you to view all fields corresponding with each frequency band.
Create a
Wi-Fi Name
for your wireless network using up to 32
characters.
Create a
Password
to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Select
None
,
WEP
, or
WPA/WPA2-Personal (
recommended).
Select the desired wireless transmission power (
High
,
Medium
or
Low
).
Use the drop-down menu to select a schedule for enabling the rule.
The schedule may be set to
Always Enable
, or you can create your
own schedules in the
Schedules
section (refer to page 73).
Click
Save
when you are done.
Wi-Fi Name
(SSID):
Password:
Security Mode:
Transmission
Power:
Schedule:
