35
D-Link DIR-890L User Manual
Section 3 - Configuration
Enter the
PPTP Server IP Address
provided by your ISP.
Enter the
Username
provided by your ISP.
Enter the
Password
provided by your ISP.
Select either
Always on
,
On demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the
PPTP IP Address
provided by your ISP (for Static IP only).
Enter the
PPTP Subnet Mask
provided by your ISP (for Static IP only).
Enter the
PPTP Gateway IP Address
provided by your ISP (for Static
IP only).
Enter the
Primary DNS Server
IP address assigned by your ISP.
Enter the
Secondary DNS Server
IP address assigned by your ISP.
Maximum Transmission Unit - by default this field will be set to
Auto
. Select
Manual
if you need to change the MTU for optimal
performance with your ISP.
Click
Save
when you are done.
PPTP Server IP
Address:
Username:
Password:
Reconnect Mode:
Maximum Idle Time:
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP
Address:
Primary DNS Server:
Secondary DNS
Server:
MTU:
Choose
PPTP
(Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your Internet service provider (ISP) can
provide you with a username and password.
PPTP
