D-Link DIR-601, Руководство пользователя

Страница: 43 / 115

39 D-Link DIR-601 User Manual
Section 3 - Configuration
Check this box to enable the DHCP server on your
router. Uncheck to disable this function.
Enter the starting and ending IP addresses for the
DHCP server’s IP assignment.
Note: If you statically (manually) assign IP addresses to
your computers or devices, make sure the IP addresses
are outside of this range or you may have an IP conflict.
The length of time for the IP address lease. Enter the
Lease time in minutes.
Enable this feature to broadcast your LAN/WLAN network.
Enable DHCP
Server:
DHCP IP
Address
Range:
Lease Time:
Always
Broadcast:
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. The DIR-601 has a built-in DHCP server. The DHCP Server will automatically assign an IP address
to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP
Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-601. The
DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting
and ending address of the IP address pool.