DIR-320
Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Open access from any
external host
Select the checkbox to allow access to the router for any host. When
the checkbox is selected, the
IP version
drop-down list is
displayed on the page, and the
IP address
and
Mask
fields are not
available for editing.
IP version
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
IP address
A host or a subnet to which the rule is applied. You can specify an
IPv4 or IPv6 address.
Mask
For the IPv4-based network only.
The mask of the subnet.
Public port
For the IPv4-based network only.
An external port of the router. You can specify only one port.
Protocol
The protocol available for remote management of the router.
After specifying the needed parameters, click the
Apply
button.
To edit a rule for remote access, click the link to the relevant rule. On the opened page, change the
needed parameters and click the
Apply
button.
To remove a rule for remote access, select the checkbox located to the left of the relevant line in the
table and click the
Delete
button. Also you can remove a rule on the editing page.
Page
166
of 220
