D-Link DI-304 Скачать руководство пользователя страница 42

Страница: 42 / 105

DI-304/DI-304M ISDN Remote Router

ISP Access Setup

♦

ISP Name –

Enter the ISP name.

♦

Username –

Enter the ISP supplied username.

♦

Password –

Enter the ISP supplied password.

♦

Scheduler (1-15)

–

Enter up to 4 index numbers for calls that have been

previously configured on the

Call Schedule Setup

windows (under

Advanced Setup

ISDN Dial Backup Setup

♦

Dial Backup Mode –

There are three options:

◊

None - Disable the backup function.

◊

Packet Trigger - The backup line is disconnected until a packet

from a local host triggers the router to establish a connection.

◊

Always On - If the broadband connection is no longer available,

the backup line will automatically connect and stay Always On
until the broadband connection is recovered.

PPP/MP Setup

♦

PPP Authentication –

Select

PAP or CHAP

for widest compatibility.

♦

Always On

- If the broadband connection is no longer available, the

backup line will automatically connect and stay Always On until the
broadband connection is recovered.

♦

Idle Timeout –

Idle timeout means the router will disconnect after being

idle for a preset amount of time. The default is 180 seconds. If you set the
time to 0, the PPP session will not terminate itself.

♦

Fixed IP –

Check

No (Dynamic IP

) unless your ISP has provided you

with a static IP address.

♦

Fixed IP Address –

If your ISP has provided you with a static IP address

enter it here.

IP Address Assignment Method (IPCP)

♦

Fixed IP –

Check

No (Dynamic IP)

unless your ISP has provided you

with a static IP address.

♦

Fixed IP Address

–

If you ISP has provided you with a static IP address

enter it here.
Click

OK.

Содержание DI-304










































































































Результаты поиска

Содержание DI-304

Отзывы:

Похожие инструкции для DI-304

Бренды по названию

Популярные бренды

D-Link DI-304, Руководство пользователя

Результаты поиска

Содержание DI-304

Отзывы:

Похожие инструкции для DI-304

Бренды по названию

Популярные бренды