D-Link DI-2621, Руководство по установке

Страница: 16 / 30

DI-2621 Router
4 Sending data TXD output
5 Require to send RTS Use to connect to MODEM
7 Data terminal ready DTR Use to connect to MODEM
8 Signal ground SG
The console cable used to DI-2621 modulor Router Console port external connecting is as the following picture :
The cable is used to connect DI-2621 modulor Router Console port and external console terminal equipment , with
one port of RJ45 8—pin, and another port of DB25and DB9. RJ45 pin insert into a DI-2621 modulor Router
Console port socket
，
the DB25 and DB9 port can choose to use according to the terminal serial port .The inter
connecting is as the following . The console cable numder is DRC0001 .
2. AUX port
Remote console port
——
AUX port speed is 1200bps
—
57600bps
，
RJ45 interface
，
parity chack is optional and
has flaw control. The AUXport can connect to every kinds of async terminal or supported by MODEM far control
and configuration .AUX port communication parameter also can be configured as:
：
speed
—
9600bps
、
8-bit data
bits , no parity , 1-bit stop bits.
The AUX port special cable is used to connect AUX port and external Async terminal equipment with one port of
RJ45 8-pin and another port 25 pin (DB25) and 9 pin(DB9). RJ45 port insert into 2600 seriel Router AUX port
socket.The DB25 and DB9port can choose to use according to the requirement of async serial port .AUXport
conception is similar to Console port.The inter connecting of the cable is as the following
，
the cable number is
DRC0011
。
3.4 Connecting to Fast Ethernet interface
(1) 10/100Mbps siutes to Ethernet port
，
supplies UTP (RJ45) interface
，
with ACT
、
Link
、
100Mbps indicator lamp,
can be connected to HUB on UTP port through twist-pair. UTP port number-order is similar to Console
port , the order is as the following table:
(2) 10/100Mbps Ethernet port and HUB connecting picture is as the following .
- 12 -