manualshive.com logo in svg

D-Link DGS-3700-12, Руководство пользователя

D-Link DGS-3700-12 - коммутатор с 12 портами, предназначенный для установки в сетевых системах. Для подробного руководства по установке оборудования, загрузите бесплатный Hardware Installation Manual с нашего сайта. Управляйте своей сетью профессионально с помощью этого надежного устройства от D-Link.

Поделиться
Скачать
background image

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual 

 

 

 

36 

 

NOTE:

 The Switch's factory default IP address is 10.90.90.90 with a 

subnet mask of 255.0.0.0 and a default gateway of 0.0.0.0. 

 

To use the BOOTP or DHCP protocols to assign the Switch an IP address, subnet mask, and default gateway 
address: 

Select 

BOOTP

 or 

DHCP

, this will determine how the Switch will be assigned an IP address. 

The lower part of the window is to display the out-of-band management information that has been configured in 

Management > Out of Band Management Settings

 window. 

The IP Address Settings options are: 

Parameter               Description 

Static 

Allows the entry of an IP address, Subnet Mask, and a Default Gateway for the Switch. These 
fields should be of the form xxx.xxx.xxx.xxx, where each xxx is a number (represented in decimal 
form) between 0 and 255. This address should be a unique address on the network assigned for 
use by the network administrator. 

DHCP 

The Switch will send out a DHCP broadcast request when it is powered up. The DHCP protocol 
allows IP addresses, network masks, and default gateways to be assigned by a DHCP server. If 
this option is set, the Switch will first look for a DHCP server to provide it with this information 
before using the default or previously entered settings. 

BOOTP 

The Switch will send out a BOOTP broadcast request when it is powered up. The BOOTP 
protocol allows IP addresses, network masks, and default gateways to be assigned by a central 
BOOTP server. If this option is set, the Switch will first look for a BOOTP server to provide it with 
this information before using the default or previously entered settings. 

IP Interface 

This field displays the IP Interface that is currently being used on the Switch. 

Management 
VLAN Name 

This allows the entry of a VLAN Name from which a management station will be allowed to 
manage the Switch using TCP/IP (in-band via web manager or Telnet). Management stations that 
are on VLANs other than the one entered here will not be able to manage the Switch in-band 
unless their IP addresses are entered in the 

Security IP Management

  window. If VLANs have 

not yet been configured for the Switch, the default VLAN contains all of the Switch's ports. There 
are no entries in the Security IP Management table, by default, so any management station that 
can connect to the Switch can access the Switch until a management VLAN is specified or 
Management Station IP Addresses are assigned. 

Interface Admin 
State 

This field enables or disables the Interface Admin State. When the state is enabled, the IPv4 
processing will be started when the IPv4 address is configured on the IPIF. The IPv6 processing 
will be started when the IPv6 address is explicitly configured on the IPIF. 

IP Address 

The address should specify a host address and length of the network prefix. 

Subnet Mask 

A Bitmask that determines the extent of the subnet that the Switch is on. Should be of the form 
xxx.xxx.xxx.xxx, where each xxx is a number (represented in decimal) between 0 and 255. The 
value should be 255.0.0.0 for a Class A network, 255.255.0.0 for a Class B network, and 
255.255.255.0 for a Class C network, but custom subnet masks are allowed. 

Gateway 

IP address that determines where packets with a destination address outside the current subnet 
should be sent. This is usually the address of a router or a host acting as an IP gateway. If your 
network is not part of an Intranet, or you do not want the Switch to be accessible outside your 
local network, you can leave this field unchanged. 

Click 

Apply

 to implement changes made. 

Содержание DGS-3700-12













































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-3700-12

Barracuda Networks Network Quick Start Manual preview
Network
Бренд: Barracuda Networks Страницы: 2
Paradyne 7610 Overview preview
7610
Бренд: Paradyne Страницы: 2
MA lighting grandMA2 Series Quick Manual preview
grandMA2 Series
Бренд: MA lighting Страницы: 36
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Бренд: IBM Страницы: 184
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Бренд: NETGEAR Страницы: 2
Dust Networks SmartMesh IA-510 D2511 Manager'S Manual preview
SmartMesh IA-510 D2511
Бренд: Dust Networks Страницы: 30
Draytek Vigor 2700G Specifications preview
Vigor 2700G
Бренд: Draytek Страницы: 2
Genie IP8ESP User Manual preview
IP8ESP
Бренд: Genie Страницы: 6
Ubiquiti UniFi Cloud Key Quick Start Manual preview
UniFi Cloud Key
Бренд: Ubiquiti Страницы: 13
SurfControl 509-8629-00 Setup Manual preview
509-8629-00
Бренд: SurfControl Страницы: 2
Federal Signal Corporation AR2000-M Installation And Maintenance Manual preview
AR2000-M
Бренд: Federal Signal Corporation Страницы: 49
Ubiquiti EdgeRouter 12 Quick Start Manual preview
EdgeRouter 12
Бренд: Ubiquiti Страницы: 23
CopperOptics 150-1342-01 Manual preview
150-1342-01
Бренд: CopperOptics Страницы: 12
FiberHome AN5506-04-B User Manual preview
AN5506-04-B
Бренд: FiberHome Страницы: 44
Draytek Vigor1000B Quick Start Manual preview
Vigor1000B
Бренд: Draytek Страницы: 17
Supermicro SSG-927R-E2CJB User Manual preview
SSG-927R-E2CJB
Бренд: Supermicro Страницы: 62
R.V.R. Elettronica PTX30-UHT Installation, Technical And Maintenance Manual preview
PTX30-UHT
Бренд: R.V.R. Elettronica Страницы: 171
PC Concepts Full-Rated Router ADSL2+ User Manual preview
Full-Rated Router ADSL2+
Бренд: PC Concepts Страницы: 104

Бренды по названию

Популярные бренды

Загрузить еще бренды