manualshive.com logo in svg

D-Link DGS-3700-12, Руководство пользователя

D-Link DGS-3700-12 - коммутатор с 12 портами, предназначенный для установки в сетевых системах. Для подробного руководства по установке оборудования, загрузите бесплатный Hardware Installation Manual с нашего сайта. Управляйте своей сетью профессионально с помощью этого надежного устройства от D-Link.

Поделиться
Скачать
background image

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual 

 

 

 

208 

Identifier 

The NAS-Identifier of the RADIUS account. (This is not necessarily the same as sysName 
in MIB II.) 

ServerIndex 

The identification number assigned to each RADIUS Accounting server that it shares a 
secret with. 

ServerAddress 

The (conceptual) table listing the RADIUS accounting servers with which it shares a 
secret. 

ServerPortNumber 

The UDP port it is using to send requests to this server. 

RoundTripTime 

The time interval between the most recent Accounting-Response and the Accounting-
Request that matched it from this RADIUS accounting server. 

Requests 

The number of RADIUS Accounting-Request packets sent. This does not include 
retransmissions. 

Retransmissions 

The number of RADIUS Accounting-Request packets retransmitted to this RADIUS 
accounting server. Retransmissions include retries where the Identifier and Acct-Delay 
have been updated, as well as those in which they remain the same. 

Responses 

The number of RADIUS packets received on the accounting port from this server. 

MalformedResponses 

The number of malformed RADIUS Accounting-Response packets received from this 
server. Malformed packets include packets with an invalid length. Bad authenticators and 
unknown types are not included as malformed accounting responses. 

BadAuthenticators 

The number of RADIUS Accounting-Response packets, which contained invalid 
authenticators, received from this server. 

PendingRequests 

The number of RADIUS Accounting-Request packets sent to this server that have not yet 
timed out or received a response. This variable is incremented when an Accounting-
Request is sent and decremented due to receipt of an Accounting-Response, a timeout or 
a retransmission. 

Timeouts 

The number of accounting timeouts to this server. After a timeout it may retry to the same 
server, send to a different server, or give up. A retry to the same server is counted as a 
retransmit as well as a timeout. A send to a different server is counted as an Accounting-
Request as well as a timeout. 

UnknownTypes 

The number of RADIUS packets of unknown type which were received from this server on 
the accounting port. 

PacketsDropped 

The number of RADIUS packets, which were received from this server on the accounting 
port and dropped for some other reason. 

IP-MAC-Port Binding (IMPB) 

The IP network layer uses a four-byte address. The Ethernet link layer uses a six-byte MAC address. Binding these 
two address types together allows the transmission of data between the layers. The primary purpose of IP-MAC 
binding is to restrict the access to a switch to a number of authorized users. Only the authorized client can access the 
Switch’s port by checking the pair of IP-MAC addresses with the pre-configured database, or when DHCP snooping is 
enabled, the switch will automatically learn the IP/MAC pairs by snooping DHCP packets and saving them to the IMPB 
white list. If an unauthorized user tries to access an IP-MAC binding enabled port, the system will block the access by 
dropping its packet. For the DGS-3700 Series, active and inactive entries use the same database. The maximum 
entry number is 511. The creation of authorized users can be manually configured by CLI or Web. The function is port-
based, meaning a user can enable or disable the function on the individual port. 

The IP-MAC-Port Binding folder contains five windows: IMP Binding Global Settings, IMP Binding Port Settings, IMP 
Binding Entry Settings, DHCP Snooping Entries, and MAC Block List. 

IMPB Global Settings 

This window is used to enable or disable the ACL mode, Trap Log State and DHCP Snoop state on the switch. When 
the user enables the ACL Mode for IP-MAC Binding it will create two Access Profile Entries on the Switch. The 

Содержание DGS-3700-12













































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-3700-12

H3C SR6600 SPE-FWM Vxlan Command Reference preview
SR6600 SPE-FWM
Бренд: H3C Страницы: 45
H3C SR6600 SPE-FWM Manual preview
SR6600 SPE-FWM
Бренд: H3C Страницы: 80
H3C MSR 5600 Configuration Manual preview
MSR 5600
Бренд: H3C Страницы: 46
H3C MSR 5600 Comware 7 Vxlan Command Reference preview
MSR 5600
Бренд: H3C Страницы: 45
H3C MSR 3600 Quick Start preview
MSR 3600
Бренд: H3C Страницы: 4
H3C SR6600 SPE-FWM Fundamentals Configuration Manual preview
SR6600 SPE-FWM
Бренд: H3C Страницы: 184
LaCie 8BIG RACK THUNDERBOLT 2 Quick Start Manual preview
8BIG RACK THUNDERBOLT 2
Бренд: LaCie Страницы: 28
UfiSpace S9600-28DX Hardware Installation Manual preview
S9600-28DX
Бренд: UfiSpace Страницы: 34
NKE BOX Wi-Fi User Manual And Installation Manual preview
BOX Wi-Fi
Бренд: NKE Страницы: 15
YATO YT-82380 Original Instructions Manual preview
YT-82380
Бренд: YATO Страницы: 96
ActionTec GT704WR User Manual preview
GT704WR
Бренд: ActionTec Страницы: 115
Riverbed SteelCentral AppResponse 2180 Upgrade And Maintenance Manual preview
SteelCentral AppResponse 2180
Бренд: Riverbed Страницы: 82
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Бренд: Pakedge Device & Software Страницы: 14
Comway 4G DTU Configuration Instructions preview
4G DTU
Бренд: Comway Страницы: 20
Quatech Device Server User Manual preview
Device Server
Бренд: Quatech Страницы: 98
Echelon i.LON SmartServer Hardware Manual preview
i.LON SmartServer
Бренд: Echelon Страницы: 34
Black Box LGB2003A User Manual preview
LGB2003A
Бренд: Black Box Страницы: 62
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Бренд: Riverbed Страницы: 140

Бренды по названию

Популярные бренды

Загрузить еще бренды