D-Link DGS-3700-12 Скачать руководство пользователя страница 272

Страница: 272 / 332

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual

270

Figure 10- 2 CFM MA Settings (Add) window

The fields that can be configured are described below:

Parameter Description

Enter the maintenance association name.

VID

The VLAN Identifier. Each different MA must be associated with a different VLAN.

Click

Add

to implement the changes made. To re-configure the MA, select it and click on the

Edit

button. To add a

MEP, click the

Add MEP

button.

The fields that can be configured are described below:

Parameter Description

MIP

This is the control
creation of MIPs.

This is the control creation of MIPs.

None

- Don’t create MIPs.

Auto

- MIPs can always be created on any ports in this MA, if that port is not configured with

a MEP of that MA.

Explicit

- MIP can be created on any ports in this MA, only if the next existent lower level has

a MEP configured on that port, and that port is not configured with a MEP of this MA.

Defer

- Inherit the setting configured for the maintenance domain that this MA is associated

with. This is the default value.

SenderID

This is the control
transmission of the
sender ID TLV.

This is the control transmission of the sender ID TLV.

None

- Don’t transmit sender ID TLV. This is the default value.

Chassis

- Transmit sender ID TLV with chassis ID information.

Manage

- Transmit sender ID TLV with manage address information.

Chassis Manage

- Transmit sender ID TLV with chassis ID information and manage address

information.

Defer

- Inherit the setting configured for the maintenance domain that this MA is associated

with. This is the default value.

CCM

This is the CCM
interval.

This is the CCM interval.

10ms

- 10 milliseconds. Not recommended. For test purposes.

100ms

- 100 milliseconds. Not recommended. For test purposes.

1sec

- One second.

10sec

- Ten seconds. This is the default value.

1min

- One minute.

10min

- Ten minutes.

MEP ID(s)

This is to specify the
MEP IDs contained in
the maintenance
association.

This is to specify the MEP IDs contained in the maintenance association. The range of the
MEP ID is

8191

Add

- Add MEP ID(s).

Delete

- Delete MEP ID(s).

By default, there is no MEP ID in a newly created maintenance association.

Click

Add

to implement changes made. To view the

MIP Port Table

window, click on the

MIP Port Table

button. The

following window opens:

Содержание DGS-3700-12













































































































































































































































































































































Результаты поиска

Содержание DGS-3700-12

Отзывы:

Похожие инструкции для DGS-3700-12

Бренды по названию

Популярные бренды

D-Link DGS-3700-12, Руководство пользователя

Результаты поиска

Содержание DGS-3700-12

Отзывы:

Похожие инструкции для DGS-3700-12

Бренды по названию

Популярные бренды