xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Hardware Installation Guide
44
DGS-3620-28PC:128Gbps
DGS-3620-52T:176Gbps
DGS-3620-52P:176Gbps
64 Byte System Packet
Forwarding Rate
DGS-3620-28TC/28TC-DC:95.24Mpps
DGS-3620-28SC/28SC-DC:95.24Mpps
DGS-3620-28PC:95.24Mpps
DGS-3620-52T:130.95Mpps
DGS-3620-52P:130.95Mpps
Priority Queues
8 Priority Queues per port
MAC Address Table
Supports 32K MAC address
Supports 256 static MAC
Port Functions
Feature
Detailed Description
Console Port
RJ-45 interface for out-of-band CLI configuration
1G Port
10/100/1000Base-T ports compliant to following standards:
-
IEEE 802.3 compliance
-
IEEE 802.3u compliance
-
Support Full-Duplex operations
-
IEEE 802.3x Flow Control support for Full-Duplex mode
-
IEEE 802.3ab compliance
-
IEEE 802.3af compliance (DGS-3620-28PC & DGS-3620-52P only)
-
IEEE 802.3at compliance (DGS-3620-28PC & DGS-3620-52P only)
SFP ports compliant to following standards:
-
IEEE 802.3z compliance
-
IEEE 802.3u compliance (Firmware R2 support)
SFP Transceivers Supported:
-
DEM-310GT (1000Base-LX, Single-mode, 10km)
-
DEM-311GT (1000ase-SX, Mutli-mode, 550m)
-
DEM-312GT2 (1000Base-SX, Multi-mode, 2km)
-
DEM-314GT (1000BASE-LHX, Single-mode, 50km)
-
DEM-315GT (1000BASE-ZX, Single-mode, 80km)
-
DGS-712 (1000BASE-TX)
-
DEM-330T/R (1000BASE-BX, WDM transceiver, Single-Mode 10km)
-
DEM-331T/R (1000BASE-BX, WDM transceiver, Single-Mode 40km)
-
DEM-210 (100Base-FX, Multi-mode, 2km,)
-
DEM-211 (100Base-FX, Single-mode, 15km,
-
DEM-220T (100Base-BX, Wavelength Tx:1550nm, Rx:1310nm, Single-mode, 20km)
-
DEM-220R (100Base-BX, Wavelength Tx:1310nm, Rx:1550nm, Single-mode, 20km)
PoE Specifications
1. Supports IEEE 802.3af POE and IEEE 802.3at POE+ compliance
2. Supplies power to PD device up to 15.4W per port (802.3af) or 30W+ per port
(802.3at) and more sufficiently is able to provide power to PD devices
3. Power Consumption: 370W
but when connected to the RPS the consumption is 740W
4. The auto discovery feature, automatically recognizes the connection of the PD device
and immediately provides power
5. Auto disable port if the port current is over 600mA while other ports remain active
6. Active circuit protection, automatically disables the port if there is a short while other
ports remain active
7. For 802.3af/at capable devices, provides the power for the following classifications
below:
Class
Usage
Max Power used by PD
0
Default
12.95W