D-Link DGS-3312SR Скачать руководство пользователя

Страница: 85 / 283

DGS-3312SR Stackable Gigabit Layer 3 Switch

Figure 4- 36. Instance ID Settings window- Add

The user may configure the following parameters to create a MSTI in the Switch.

Parameter Description

MSTI ID

Enter a number between 1 and 15 to set a new MSTI on the Switch.

Type

Create

is selected to create a new MSTI. No other choices are available for this field

when creating a new MSTI.

VID List (1-4094)

This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number 1 to 4094.

Click

Apply

to implement changes made.

To configure the settings for the CIST, click on its hyperlinked

MSTI ID

number in the

MST Configuration

Identification

window, which will reveal the following window to configure:

Figure 4- 37. Instance ID Settings window - CIST modify

The user may configure the following parameters to configure the CIST on the Switch.

Parameter Description

MSTI ID

The MSTI ID of the CIST is 0 and cannot be altered.

Type

This field allows the user to choose a desired method for altering the MSTI settings.
The user has 2 choices.

•

Add VID

- Select this parameter to add VIDs to the MSTI ID, in

conjunction with the VID List parameter.

•

Remove VID

- Select this parameter to remove VIDs from the MSTI ID, in

conjunction with the VID List parameter.

VID List (1-4094)

This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number 1 to 4094.

Содержание DGS-3312SR




























































































































































































































































































Результаты поиска

Содержание DGS-3312SR

Отзывы:

Похожие инструкции для DGS-3312SR

Бренды по названию

Популярные бренды

D-Link DGS-3312SR, Руководство пользователя

Результаты поиска

Содержание DGS-3312SR

Отзывы:

Похожие инструкции для DGS-3312SR

Бренды по названию

Популярные бренды