background image

 

Registration Card 

All Countries and Regions Excluding USA 

Print, type or use block letters. 

Your name: Mr./Ms_____________________________________________________________________________ 
Organization: ________________________________________________ Dept. ____________________________ 
Your title at organization: ________________________________________________________________________ 
Telephone: _______________________________________  Fax:________________________________________ 
Organization's full address: ______________________________________________________________________ 
 ____________________________________________________________________________________________ 
Country: _____________________________________________________________________________________ 
Date of purchase (Month/Day/Year): _______________________________________________________________ 

Product Model 

Product Serial No. 

* Product installed in type of 

computer  

* Product installed in 

computer serial No. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(* Applies to adapters only) 

Product was purchased from: 

Reseller's name:  ______________________________________________________________________________ 
Telephone: _______________________________________  
 

Answers to the following questions help us to support your product: 

1. Where and how will the product primarily be used? 

 

Home  Office  Travel  Company Business  Home Business  Personal Use 

2. How many employees work at installation site? 

 

1 employee  2-9  10-49  50-99  100-499  500-999  1000 or more 

3. What network protocol(s) does your organization use ? 

 

XNS/IPX  TCP/IP  DECnet  Others_____________________________ 

4. What network operating system(s) does your organization use ? 

 

D-Link LANsmart  Novell NetWare  NetWare Lite  SCO Unix/Xenix  PC NFS  3Com 3+Open  Cisco Network 

 

Banyan Vines  DECnet Pathwork  Windows NT   Windows 98  Windows 2000/ME  Windows XP 

 

Others__________________________________________ 

5. What network management program does your organization use ? 

 

D-View  HP OpenView/Windows  HP OpenView/Unix  SunNet Manager  Novell NMS 

 

NetView 6000  Others________________________________________ 

6. What network medium/media does your organization use ? 

 

Fiber-optics  Thick coax Ethernet  Thin coax Ethernet  10BASE-T UTP/STP 

 

100BASE-TX  1000BASE-T  Wireless 802.11b and 802.11g  wireless 802.11a   Others_________________ 

7. What applications are used on your network? 

 

Desktop publishing  Spreadsheet  Word processing  CAD/CAM 

 

Database management  Accounting  Others_____________________ 

8. What category best describes your company? 

 

Aerospace  Engineering  Education  Finance  Hospital  Legal  Insurance/Real Estate  Manufacturing 

 

Retail/Chain store/Wholesale  Government  Transportation/Utilities/Communication  VAR 

 

System house/company  Other________________________________ 

9. Would you recommend your D-Link product to a friend? 

 

Yes  No  Don't know yet 

10.Your comments on this product? 

 __________________________________________________________________________________________ 
 __________________________________________________________________________________________

Содержание DGS-3130-30TS




















































































Отзывы: