manualshive.com logo in svg

D-Link DGS-3024, Руководство пользователя

Сетевой коммутатор D-Link DGS-3024 - профессиональное устройство с 24 портами для высокоскоростной передачи данных. Для настройки и использования устройства, необходимо загрузить User Manual с нашего веб-сайта бесплатно. Получите все необходимые инструкции для работы с D-Link DGS-3024 скачав руководство по эксплуатации с manualshive.com.

Поделиться
Скачать
background image

 

 

Trademarks 

Copyright 2006 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/ 
D-Link Systems Inc. All other trademarks belong to their respective proprietors. 

Copyright Statement 

No part of this publication may be reproduced in any form or by any means or used to make an derivative such as translation, transformation, or 
adaptation without permission from DLink Corporation/ D-Link Systems Inc as stipulated by the United States Copyright Act of 1976. 

CE EMI Class A Warning 

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take 
adequate measures. 

 

D-Link Europe Limited Product Warranty 

 

General Terms 

 

The Limited Product Warranty set forth below is given by D-LINK (Europe) Ltd. (herein referred to as "D-LINK"). This Limited Product 
Warranty is only effective upon presentation of the proof of purchase. Upon further request by D-LINK, this warranty card has to be presented, 
too. 

 

EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY, D-LINK MAKES NO OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. D-
LINK EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES 
THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. SOME STATES OR 
COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR 
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR 
COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY TO YOU. THIS LIMITED 
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE 
TO STATE OR FROM COUNTRY TO COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE OR COUNTRY LAWS 
FOR A FULL DETERMINATION OF YOUR RIGHTS. 

 

This limited warranty applies to D-LINK branded hardware products (collectively referred to in this limited warranty as “D-LINK Hardware 
Products”) sold by from D-LINK (Europe) Ltd., its worldwide subsidiaries, affiliates, authorized resellers, or country distributors (collectively 
referred to in this limited warranty as “D-LINK”) with this limited warranty. The Term “D-LINK Hardware Product” is limited to the hardware 
components and all its internal components including firmware. The term “D-LINK Hardware Product” DOES NOT include any software 
applications or programs. 

 

Geographical Scope of the Limited Product Warranty 

 

This Limited Product Warranty is applicable in all European Countries as listed in the addendum “European Countries for D-LINK Limited 
Product Warranty”. The term “European Countries” in this D-LINK Limited Product Warranty only include the countries as listed in this 
addendum. The Limited Product Warranty will be honored in any country where D-LINK or its authorized service providers offer warranty 
service subject to the terms and conditions set forth in this Limited Product Warranty. However, warranty service availability and response 
times may vary from country to country and may also be subject to registration requirements. 

 

Limitation of Product Warranty 

 

D-LINK warrants that the products described below under normal use are free from material defects in materials and workmanship during the 
Limited Product Warranty Period set forth below ("Limited Product Warranty Period"), if the product is used and serviced in accordance with 
the user manual and other documentation provided to the purchaser at the time of purchase (or as amended from time to time). D-LINK does not 
warrant that the products will operate uninterrupted or error-free or that all deficiencies, errors, defects or non-conformities will be corrected. 

 

This warranty shall not apply to problems resulting from: (a) unauthorised alterations or attachments; (b) negligence, abuse or misuse, including 
failure to operate the product in accordance with specifications or interface requirements; (c) improper handling; (d) failure of goods or services 
not obtained from D-LINK or not subject to a then-effective D-LINK warranty or maintenance agreement; (e) improper use or storage; or (f) 
fire, water, acts of God or other catastrophic events. This warranty shall also not apply to any particular product if any D-LINK serial number 
has been removed or defaced in any way. 

 

D-LINK IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A RESULT OF YOUR FAILURE TO FOLLOW THE 
INSTRUCTIONS FOR THE D-LINK HARDWARE PRODUCT. 

Содержание DGS-3024

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-3024

Billion BiPAC 4500NZ(L) User Manual preview
BiPAC 4500NZ(L)
Бренд: Billion Страницы: 146
B+B SmartWorx CR10 v2 Start Manual preview
CR10 v2
Бренд: B+B SmartWorx Страницы: 4
BandLuxe R500 Series User Manual preview
R500 Series
Бренд: BandLuxe Страницы: 67
DBM ACE9600 Operating Manual preview
ACE9600
Бренд: DBM Страницы: 50
National Instruments NI 9265 Operating Instructions Manual preview
NI 9265
Бренд: National Instruments Страницы: 26
National Instruments NI 9203 User Manual And Specifications preview
NI 9203
Бренд: National Instruments Страницы: 85
National Instruments Module SCXI-1503 User Manual preview
Module SCXI-1503
Бренд: National Instruments Страницы: 79
XAVI Technologies Corp. 7721r User Manual preview
7721r
Бренд: XAVI Technologies Corp. Страницы: 71
Conceptronic C150BRS4 Quick Installation Manual preview
C150BRS4
Бренд: Conceptronic Страницы: 230
IBM J02M Quick Start Manual preview
J02M
Бренд: IBM Страницы: 32
Jetter JetWeb JX2-PR0FI1 Operator'S Manual preview
JetWeb JX2-PR0FI1
Бренд: Jetter Страницы: 67
Moxa Technologies ICS-G7748A Series Quick Installation Manual preview
ICS-G7748A Series
Бренд: Moxa Technologies Страницы: 10
C-Data CR200-1432R-B User Manual preview
CR200-1432R-B
Бренд: C-Data Страницы: 26
E-TOP PR126g User Manual preview
PR126g
Бренд: E-TOP Страницы: 24
Intellinet 561051 Quick Install Manual preview
561051
Бренд: Intellinet Страницы: 12
Jøtul ERS 01 Operation And Maintenance Manual preview
ERS 01
Бренд: Jøtul Страницы: 20
1&1 Homeserver+ Quick Start Manual preview
Homeserver+
Бренд: 1&1 Страницы: 32
Sparklan WNFB-265AXI(BT) User Manual preview
WNFB-265AXI(BT)
Бренд: Sparklan Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды