manualshive.com logo in svg

D-Link DGS-3024, Руководство пользователя, Страница: 189 / 208

Поделиться
Скачать
D-Link DGS-3024 Скачать руководство пользователя страница 189

 

 

Technical Support

 

You can find software updates and user documentation on 

the D-Link website. 

 

D-Link provides free technical support for customers within 

the United States and within Canada for the duration of the 

warranty period on this product. 

 

U.S. and Canadian customers can contact D-Link technical 

support through our website, or by phone. 

 

Tech Support for customers within the United 

States:

 

D-Link Technical Support over the Telephone:

 

(888) 843-6100 

Hours of Operation: 8:00AM to 6:00PM PST 

D-Link Technical Support over the Internet:

 

http://support.dlink.com 

email:[email protected] 

 

Tech Support for customers within Canada:

 

D-Link Technical Support over the Telephone:

 

(800) 361-5265 

Monday to Friday 7:30am to 12:00am EST 

D-Link Technical Support over the Internet:

 

http://support.dlink.ca 

email:[email protected] 

 

 

 

 

 

 

 

 

 

Содержание DGS-3024

















































































































































































































Отзывы:

Нет отзывов