D-Link DGS-1510 Series, Справочное руководство

Страница: 636 / 711

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
633
Parameters
recurring Specifies that summer time should start and end on the specified
week day of the specified month.
date Specifies that summer time should start and end on the specified
date of the specified month.
WEEK Specifies the week of the month (1 to 4 or last).
DAY Specifies the day of the week (sun, mon, and so on).
DATE Specifies the date of the month (1 to 31).
MONTH Specifies the month (1 to 12).
YEAR Specifies the start and end years for the summer time data.
HH:MM Specifies the time (24 hours format ) in hours and minutes.
OFFSET (Optional) Specifies the number of minutes to add during summer
time. The default value is 60. The range of this offset is 30, 60, 90
and 120.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to automatically switch over to summer time. The command has two forms. One is
the recurring form which is used to specify the time through the week and the day of the month. The
other form is the date form which is used to specify the date of the month.
In both the date and recurring forms of the command, the first part of the command specifies when
summer time begins, and the second part specifies when it ends.
Example
This example shows how to specify that summer time starts on the first Sunday in June at 2 a.m. and
ends on the last Sunday in October at 2 a.m.
Switch# configure terminal
Switch(config)# clock summer-time recurring 1 sun 6 2:00 last sun 10 2:00
Switch(config)#
72-3 clock timezone
This command is used to set the time zone for display purposes. Use the no form of this command to
revert to the default setting.
clock timezone {+ | -} HOURS-OFFSET [ MINUTES-OFFSET ]
no clock timezone
Parameters
+ | - +: Specifies that time to be added to the UTC.
-: Specifies that time to be subtracted from the UTC.