D-Link DGS-1510 Series, Справочное руководство

Страница: 448 / 711

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
445
Leap Leap indicator. The value is from 0 to 3.
RefID The IP address of the machine peer is synchronized to.
RootDistance The total roundtrip delay to the primary reference clock.
RootDispersion The total root dispersion to the primary reference clock.
PPoll The peer poll exponent.
HPoll The host poll exponent.
KeyID Authentication key ID.
Version The NTP version that the peer is using.
Association The Association ID.
Reach Peer reaching ability.
Unreach Unreached counter.
Flash Flash status word for diagnosing problems.
Timer The peer timer in seconds.
Flags The peer flags.
Reference Timestamp The time that the system clock was last set or corrected.
Originate Timestamp The time that the request departed for the server at the client.
Receive Timestamp The time that the request arrived from the client at the server.
Transmit Timestamp The time that replied to the client at the server.
Filter Delay Round-trip delay of each sample in milliseconds.
Filter Offset Clock offset of each sample in milliseconds.
Filter Order Filter order of each sample.
Offset Offset of the peer clock relative to our clock.
Delay Round-trip delay to the peer.
Error Bound Peer dispersion.
Filter Error Approximate error of each sample.
St Stratum of the peer.
Poll Polling interval in seconds.
Reach Peer reaching ability.
Delay Round-trip delay to peer in milliseconds.
Offset Relative time of peer clock to local clock in milliseconds.
Disp Dispersion.
51-15 show ntp status
This command is used to display the NTP status.
show ntp status
Parameters
None.
Default