D-Link DGS-1510 Series, Справочное руководство

Страница: 20 / 711

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
17
Level: 1.
Usage Guideline
Use this command to exit the current configuration mode and go back to the last mode. When the
user is in the User EXEC Mode or the Privilege EXEC Mode, this command will logout the session.
Example
This example shows how to exit from the Interface Configuration Mode and return to the Global
Configuration Mode.
Switch# configure terminal
Switch(config) interface eth1/0/1
Switch(config-if)#exit
Switch(config)#
2-10 show history
This command is used to list the commands entered in the current EXEC Mode session.
show history
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Commands entered are recorded by the system. A recorded command can be recalled by pressing
CTRL+P or the Up Arrow key which will recall previous commands in sequence. The history buffer
size is fixed at 20 commands.
The function key instructions, below, displays how to navigate the command in the history buffer.

CTRL+P or the Up Arrow key - Recalls commands in the history buffer, beginning with the
most recent command. Repeat the key sequence to recall successively older commands.

CTRL+N or the Down Arrow key - Returns to more recent commands in the history buffer
after recalling commands with Ctrl-P or the Up Arrow key. Repeat the key sequence to recall
successively more recent commands.
Example
This example shows how to display the command buffer history.
Switch# show history
help
history
Switch#