4 Configuration
D-Link Web Smart Switch User Manual
70
Figure 4.100 - Add Access Rule – IPv4 ICMP
Assign sequence number:
Sequence No. (1-65535):
Specify the sequence number. The value is from 1 to 65535.
Auto Assign:
Auto assign the sequence number for a new rule.
Assign Rule Criteria:
Specify the IPv4 ACL settings.
ToS:
Check the box to specify the ToS priority and DSCP value.
ToS (0-7):
Specify the ToS value.
DSCP (0-63):
Specify the DSCP value. The values are between 0 and 63.
IPv4 Address:
Specify the IPv4 Source and destination address.
Source:
Select the source IP to be specified or Any relevant to the ACL rules. Enter a source IP address and
source IP mask. For example, to set 176.212.XX.XX, use mask 255.255.0.0.
Destination:
Select the destination IP to be specified or Any relevant to the ACL rules. Enter a destination IP
address and destination IP mask. For example, to set 176.212.XX.XX, use mask 255.255.0.0.
Protocol:
Check
Protocol
to configure the related settings.
Protocol Type:
Select the protocol type for IPv4. The possible fields are
ICMP, IGMP, TCP, UDP
and
Protocol ID
.
ICMP Type (0-255):
Sets the ICMP Type field as an essential field to match.
Code (0-255):
Sets the ICMP code field as an essential field to match.
Select the ports which added into the
Access-List
and click
Next
button then the ACL profile is added.
To define the IPv4 ACL IGMP Rule:
Select
IPv4 ACL
with
IGMP
and click
Next
button. The updates to
show the follows:
