4 Configuration
D-Link Web Smart Switch User Manual
2
2
3
3
Login Timeout:
The Login Timeout controls the idle time-out period for security purposes, and when there is
no action for a specific time span in the Web-based Management. If the current session times out (expires),
the user is required a re-login before using the Web-based Management again. Selective range is from 3 to
30 minutes, and the default setting is 5 minutes.
System > IPv6 System Settings
The IPv6 System Settings page allow user to configure the IPv6 system information.
Figure 4.19 – System > IPv6 System Settings
IPv6 System Settings:
Interface Name:
Displays the interface name of IPv6.
IPv6 State:
Specifies the IPv6 to be enabled or disabled.
DHCPv6 Client:
Specifies the DHCPv6 client to be enabled or disabled.
IPv6 Network Address:
Specifies the IPv6 Network Address.
NS Retransmit Time Settings:
NS Retransmit Time (1-3600):
Specifies the NS retransmit time for IPv6. The field range is 1-3600, and
default is 1 second.
Automatic Link Local State Settings:
Automatic Link Local Address:
Specifies the automatic link is enabled or disabled.
Click
Apply
for the settings to take effect.
System > IPv6 Route Settings
The IPv6 Route Settings page allows user to configure the IPv6 route settings.
Figure 4.20 – System > IPv6 Route Settings
IP Interface:
Specify the IP interface which to be created.
Default Gateway:
The corresponding IPv6 address for the next hop Gateway address in IPv6 format..
Metric:
Represents the metric value of the IP interface entered into the table. This field may read a number
between 1 and 65535.
