D-Link DGS-1100-05PDV2 Скачать руководство пользователя

Страница: 8 / 56

1 Product Introduction

D-Link Smart Managed Switch User Manual

Power:

Input for a 5V/1A AC adapter.

Reset:

Press the Reset button for 1 to 5 seconds to reboot the Switch. Press the Reset button for 6 to10

seconds to reset the Switch back to the default settings. The LED will light up solid amber for 2 seconds.

When pressing the Reset button for longer than 10 seconds, the device will enter loader mode and the LED

will light up solid green for 2 seconds. If the device cannot reboot, it will automatically enter loader mode.

Alternatively, you can press Reset to power up the device and enter loader mode.

Kensington Lock:

This is used to attach a physical Kensington security lock.

GND:

This is used to connect the Switch to ground.

DGS-1100-08PV2

8-Port 10/100/1000Mbps PoE Smart Managed Switch.

Front Panel

Figure 1.7 – DGS-1100-08PV2 Front Panel

Power LED:

The Power LED lights up when the Switch is connected to a power source.

Reset:

Press the Reset button for 1 to 5 seconds to reboot the Switch. Press the Reset button for 6 to10

seconds to reset the Switch back to the default settings. The LED will light up solid amber for 2 seconds.

When pressing the Reset button for longer than 10 seconds, the device will enter loader mode and the LED

will light up solid green for 2 seconds. If the device cannot reboot, it will automatically enter loader mode.

Alternatively, you can press Reset to power up the device and enter loader mode.

Link/Act/Speed LED (Ports 1-8):

Flashing:

Indicates a network link through the corresponding port.

Blinking:

Indicates that the Switch is either sending or receiving data to the port.

Green:

Indicates that the port is running at 1000M.

Amber:

Indicates that the port is running at 10/100M.

Light off:

No link.

PoE MAX. LED:

Light up:

Indicates the power output to PDs is over 57W. No additional PDs can be powered for

safety consideration.

Blinking:

Indicates if the user unplugged certain PDs and made the PoE power budget left over 7W,

the PoE MAX LED will blink 5 seconds.

Light off:

Indicates the power budget is using less than 57W.

PoE LED (Ports 1-8):

Green:

Indicates the PoE powered device (PD) is connected and the port supplies power

successfully.

Red:

The PoE port has failed, possibly due to:

1. PoE total power budget shortage.
2. Over current: Exceeds the power current of powered device's classification.
3. Short circuit: Short circuit has been performed on a powered device.

Light off:

Indicates no Powered Device (PD) connected.

PoE Mode LED (Port 1-8):

Solid Green:

PD device insert and power feeding.

Solid Amber:

PD device insert but failure occurs.

Light off:

No PD device insert.

Содержание DGS-1100-05PDV2

























































Результаты поиска

Содержание DGS-1100-05PDV2

Отзывы:

Похожие инструкции для DGS-1100-05PDV2

Бренды по названию

Популярные бренды

D-Link DGS-1100-05PDV2, Руководство пользователя

Результаты поиска

Содержание DGS-1100-05PDV2

Отзывы:

Похожие инструкции для DGS-1100-05PDV2

Бренды по названию

Популярные бренды