D-Link DGS-1100-05PDV2 Скачать руководство пользователя страница 35

Страница: 35 / 56

4 Configuration

D-Link Smart Managed Switch User Manual

change to the forwarding state.



In the Edge mode, the port will directly change to the

spanning-tree forwarding state when a link-up occurs without

waiting for the forward-time delay. If the interface receives a

BPDU later, its operation state changes to the non-port-fast

state. By default, this option is Network.

Table 4.23

Click

Apply

to make the configurations take effect.

Click

Refresh

to renew the page.

L2 Features > Loopback Detection

The Loopback Detection function is used to detect loops created by a specific port while Spanning Tree

Protocol (STP) is not enabled in the network, especially when the down links are hubs or unmanaged

switches. The Switch will automatically shut down the port and send a log to the administrator. The looping

port will be unlocked when the Loopback Detection

Recover Time

times out. Loopback Detection can also

be enabled or disabled for a specified range of ports simultaneously.

Figure 4.40 – L2 Features > Loopback Detection

The fields that can be configured are described below:

Item

Description

Loopback Detection Global Settings

Loopback Detection

Specify to enable or disable loopback detection function. The

default is

Disabled.

Time Interval (1-32767)

Set a Loop detection Interval between

and

32767

seconds.

The default is

seconds.

Recover Time (0 or 60-

1000000)

Time allowed (in seconds) for recovery when a Loopback is

detected. The Loop Detection Recover Time can be set at

seconds, or

1000000

seconds. Entering

will disable the

Loop Detection Recover Time. The default is

seconds

Loopback Detection Port Settings

From Port / To Port

Select the range of ports to enable or disable Loopback

Detection for.

State

Enable or disable Loopback Detection for the specified range

of ports.

Table 4.24

Click

Apply

to make the configurations take effect.

Click

Refresh

to renew the Loopback Detection table.

Содержание DGS-1100-05PDV2

























































Результаты поиска

Содержание DGS-1100-05PDV2

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-1100-05PDV2, Руководство пользователя

Результаты поиска

Содержание DGS-1100-05PDV2

Отзывы:

Бренды по названию

Популярные бренды