D-Link DGS-1026MP, Быстрое руководство по установке

Страница: 2 / 48

2
E
N
G
LI
S
H # LED Status Description
1
PoE
Power
Budget
Solid red
(LED above “
300W
”) The total PoE power
consumption is between 301 and 370 W.
Solid
amber
(LED below “
300W
”) The total PoE power
consumption is between 201 and 300 W.
Solid
green
(LED below “ 200W ”) The total PoE power
consumption is between 101 and 200 W.
Solid
green
(LED below “ 100W ”) The total PoE power
consumption is between 1 and 100 W.
Off
There are no PoE-powered devices
connected to the switch.
2
LED
Mode
Solid
green
The port LEDs are displaying the port
link status. See
Link/Act
below for more
information.
Solid
amber
The port LEDs are displaying the PoE
status. See PoE Mode below for more
information.
3 Power
Solid
green
The device is powered on.
Off The device is powered off.
4
Link/Act
Ports 1
~ 26
Solid
amber
There is an active link on the
corresponding port operating at 10/100
Mbps.
Blinking
amber
There is traffic on the corresponding port
at 10/100 Mbps.
Solid
green
There is an active link on the
corresponding port operating at 1000
Mbps.
Blinking
green
There is traffic on the corresponding port
at 1000 Mbps.
5
PoE
Mode
Ports
1 ~ 24
Solid
amber
The PoE power supply on the
corresponding port has failed.
Solid
green
The corresponding port is supplying PoE
power correctly.
Table 1
Front Panel Connectors
1 2 3
Figure 2
# Item Description
1 LED Mode
Press to change the port LEDs to display the
PoE status or the link status. The color of the
LED Mode light will indicate which LED status
display is currently active.
2 Ports 1 ~ 24
10/100/1000 Mbps PoE-capable ports for
connecting Ethernet devices and PoE-
powered devices.
3
Ports 25 ~ 26
10/100/1000 Mbps/SFP combo ports. When
using one interface of these combination
ports, the other port in the pair will become
unavailable. For example, using the SFP
interface on port 25 will render the RJ45
interface on port 25 unavailable.
Table 2
Before You Begin
This Quick Installation Guide gives you step-by-
step instructions for setting up your DGS-1026MP
26-Port Unmanaged Gigabit PoE Switch. The model
you have purchased may appear slightly different
from the one shown in the illustrations. For more
detailed information about the switch, please refer
to the User Manual.
Package Contents
This DGS-1026MP package should include the
following items:
• DGS-1026MP
26-Port Unmanaged Gigabit PoE Switch
• Power cord
• Power cord retainer
• Rack mount kit and rubber feet
• This Quick Installation Guide
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
Hardware Overview
LED Indicators
1 2 3 5 4
Figure 1