D-Link DGS-1016D G3 Скачать руководство пользователя

Страница: 17 / 37

D-Link DGS-1016D/DGS-1024D User Manual

Section 3 - Hardware Installation

Hardware Installation

This chapter provides unpacking and installation information for the D-Link DGS-1016D/DGS-1024D Gigabit Ethernet Switch.

Step 1 - Before Connecting to the Network

The site where the switch is installed may greatly affect its performance. For the switch to perform safely at its optimal level,

please select a site which meets the following requirements:
1. Install the DGS-1016D / DGS-1024D in a fairly cool and dry place. See Technical Specifications page in the manual for the

acceptable operation temperature and humidity ranges.

2. Install the switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct

exposure to sunlight.

3. Leave at least 10cm of space around the switch for ventilation.
4. Place the switch within 1.82 meters (6 feet) of a power outlet.

Содержание DGS-1016D G3






































Результаты поиска

Содержание DGS-1016D G3

Отзывы:

Похожие инструкции для DGS-1016D G3

Бренды по названию

Популярные бренды

D-Link DGS-1016D G3, Руководство пользователя

Результаты поиска

Содержание DGS-1016D G3

Отзывы:

Похожие инструкции для DGS-1016D G3

Бренды по названию

Популярные бренды