D-Link DGS-1016D G3 Скачать руководство пользователя

Страница: 15 / 37

D-Link DGS-1016D/DGS-1024D User Manual

Section 2 - Safety Instructions

• To help protect the system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line

conditioner, or uninterruptible power supply (UPS).

• Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure

that nothing rests on any cables.

• Do not modify power cables or plugs. Consult a licensed electrician or local power company for site modifications. Always

follow local/national wiring rules.

• When connecting or disconnecting power to hot-pluggable power supplies, if offered with the system, observe the

following guidelines:

• Install the power supply before connecting the power cable to the power supply.

• Unplug the power cable before removing the power supply.

• If the system has multiple sources of power, disconnect power from the system by unplugging all power cables

from the power supplies.

• Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid

sudden stops and uneven surfaces.

Содержание DGS-1016D G3






































Результаты поиска

Содержание DGS-1016D G3

Отзывы:

Похожие инструкции для DGS-1016D G3

Бренды по названию

Популярные бренды

D-Link DGS-1016D G3, Руководство пользователя

Результаты поиска

Содержание DGS-1016D G3

Отзывы:

Похожие инструкции для DGS-1016D G3

Бренды по названию

Популярные бренды