D-Link DG-104SH, Руководство пользователя

Страница: 15 / 75

DG-104SH VoIP Station Gateway
Boot Menu---IP Configuration screen
♦ Gatekeeper Mode
Use the <Space> key to choose the Gatekeeper mode once the device is rebooted
(restarted). Choices include:
Auto Discovery
– When
Auto Discovery
is chosen, the VoIP gateway will auto-search the Gatekeeper
from your LAN or WAN.
Manual Discovery
– When
Manual Discovery
is chosen, the VoIP gateway will attempt to obtain the
Gatekeeper settings from the fields located just below.
No Gatekeeper
– When
No Gatekeeper
is chosen, the VoIP gateway will not need Gatekeeper.
♦ Gatekeeper IP Enter an IP address for the Gatekeeper.
♦ BOOTP
Use the <Space> key to choose the method that the VoIP gateway will use to obtain its IP settings
once it is rebooted (restarted). Choices include:
Manual
– When
Manual
is chosen, the VoIP gateway will obtain its IP settings from the fields located
just below.
BOOTP – When BOOTP is chosen, the VoIP gateway will attempt to obtain its IP settings from a
BOOTP server located on your LAN.
DHCP
– When
DHCP
is chosen, the VoIP gateway will attempt to obtain its IP settings from a DHCP
server located on your LAN.
♦
IP Address
Enter an IP address for the VoIP gateway.
♦ Subnet Mask
Enter a subnet mask for the VoIP gateway.
♦ Default Gateway
Enter the IP address of the WAN device (usually a router) you are using to make the
WAN connection.
After you have finished, press <Ctrl+S> to save changes to RAM. Next, press the <Esc> key to return to the Boot
Menu. Position the cursor over the Save Changes item and press <Enter>. This will save the settings to NV-RAM
so they will still be present after powering off or restarting the device. Make sure the Reset button on the rear panel