D-Link DFE-904, Руководство пользователя

Страница: 22 / 24

16
These holes' centers are 65m (2.56 in.) apart, at the corners of an
imaginary rectangle with sides 53 mm and 37 mm (2.1 in. and 1.46 in.)
long.
2. Drill holes in the corresponding positions on the mounting surface.
Remember that the hole positions are reversed as in a mirror image when
the hub's base faces the wall instead of facing you.
3. Hammer the supplied wall anchors all the way into the holes in the
mounting surface.
4. Drive the supplied screws most of the way into the wall anchors.
Let the screwheads protrude enough to enter the holes in the hub's base.
To mount the hub, position it so the screwheads enter the holes in its base, then
slide it downward and sideways so the screwheads enter the narrower slots
extending from the holes.