D-Link DFE-500TX ProFAST 10/100, Руководство по установке

Страница: 29 / 34

12 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter
Microsoft Windows for Workgroups 3.11
12 Installing the D-Link DFE-500TX ProFAST Ethernet PCI
Adapter
Microsoft Windows for
Workgroups 3.11
Connecting to a
Microsoft Windows NT
4.0 Server Requirements
• HP Vectra with DOS and MS-Windows for Workgroups 3.11
• D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver
disk version 971201.
• Driver: DLKPCI.DOS, version 2.42
• Microsoft Windows for Workgroups 3.11 media.
• Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink
IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the D-Link DFE-500TX PCI adapter
into a PCI slot.
2 Connect network cable media to the D-Link DFE-500TX PCI card.
3 Power on the machine and run Windows.
4 After Windows loads, open the “NETWORK” folder, and double click the
“NETWORK SETUP” icon.
5 Select “Networks” and click on “Install Microsoft Windows Network” then
hit Enter.
6 Click on “Drivers” then on “Add Adapter”.
7 Accept “Unlisted or Updated Network Adapter” and hit Enter.
8 Insert D-Link driver disk, set the path to “A:\WFW311” and click on OK.
9 Select “D-Link PCI Fast Ethernet Adapter ” and click on “OK”.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 05 03 10
I/O Address DE00 DC00 E400