D-Link DFE-500TX ProFAST 10/100, Руководство по установке

Страница: 27 / 34

11 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter
Microsoft Windows NT 3.51 Workstation
11 Installing the D-Link DFE-500TX ProFAST Ethernet PCI
Adapter
Microsoft Windows NT
3.51 Workstation
Connecting to a Novell
NetWare 4.11 Server Requirements
• HP Vectra with Windows NT3.51 Workstation.
• D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver
disk version 971201.
• Driver: DLKPCI.SYS, version 4.22.1
• Microsoft Windows NT 3.51 Workstation media.
• Microsoft Windows NT 3.51 Service Pack 5 media.
• Novell NetWare 4.11 Server system that supports IPX network protocol.
• Novell IntranetWare Client for Windows NT v4.11b installation media.
Device Configuration
Procedure
1 Before installing the D-Link DFE ProFAST PCI card, power on the
machine and boot to MS-DOS.
2 Inset the driver disk and execute “A:\DIAG”.
3 At the welcome screen, press Enter to continue diagnostics.
4 When prompted to select an adapter, select card 1 and hit Enter.
5 Verify the adapter settings as listed above.
6 If changes required, save those changes and exit.
7 With the HP Vectra turned off, install the D-Link DFE ProFAST PCI
ethernet card in to a PCI slot.
8 Connect network cable media to the D-Link DFE ProFAST PCI ethernet
card.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 09 03 10
I/O Address 1400 DC00 E400