D-Link DFE-2600 Series, Руководство пользователя

Страница: 89 / 110

Boot Configuration File 77
B
A B
OOT
C
ONFIGURATION
F
ILE
DFE-2600 series master hubs support a powerful configuration file which
allows many of the hub stack’s configuration parameters to be stored on a
centralized server. When the master hub starts up, it can be configured to
read its configuration file from the server using the TFTP protocol. This
can make it easier to manage a large number of hub stacks, since all of the
configuration parameters for all of the hubs can be managed in a single
place.
The configuration file is a text file, usually stored on the server with a
.CFG extension. It can be up to 10 KB long. Lines beginning with # are
considered comments which are ignored by the hub. All other lines are
commands, which are interpreted by the master hub.
The configuration file commands accepted by the hub are:
♦
sysname string
Takes
string
as the System Name, corresponding to the SNMP MIB-
II object sysName. This field is used to assign a name to the hub for
administrative purposes. The hub’s fully qualified domain name is of-
ten used, provided a name has been assigned. The
string
can be up
to 64 characters long.
♦
syscontact string