D-Link DFE-2600 Series, Руководство пользователя

Страница: 72 / 110

Dual-Speed Stackable Hubs User’s Guide
Master Hub Setup and Management 60
You can use PREV GROUP and NEXT GROUP to display information
about another hub, or you can enter the hub’s Group ID number directly in
the Group ID field.
Controlling Individual Ports
The Port State Menu, accessible from the Network Monitoring menu, al-
lows you to view the status of individual ports and control their settings.
The information displayed includes:
♦
Group ID. This field determines which hub’s ports are displayed.
♦
Port ID. This field determines which port is displayed.
♦
Connector Type. This field shows the port’s connector type.
♦
Link Test. This field displays Up if there is a station connected to
the port; otherwise, it displays Down.
♦
Link Test State. This field displays Enable if the port’s link status is
to be auto-detected and displayed, otherwise it displays Disable.
This variable is user configurable.
♦
Receive Polarity. This field always displays Normal if the hub is
operating properly.
♦
Auto Partition. This field displays Yes if the port has been auto-
matically partitioned off from the rest of the network due to
excessive errors on the segment. The field displays No for normal
operation.
♦
Admin State. This toggle determines whether the port should be
enabled or disabled (manually partitioned). Setting the Admin State
to Disabled will isolate the port from the rest of the network. This
variable is user configurable.
♦
Port Speed. This field displays the port’s current operating speed
(100M or 10M) relative to the speed of the device connected to it.