manualshive.com logo in svg

D-Link DES-3828 - xStack Switch - Stackable, Руководство CLI

Многофункциональный коммутатор D-Link DES-3828 - управляемый и стекируемый. Он обеспечивает высокую производительность и надежность сети. Чтобы узнать больше о спецификациях продукта, а также скачать бесплатное руководство по эксплуатации, посетите manualshive.com для загрузки документации.

Поделиться
Скачать
background image

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual

 

 

252

39 

A

CCESS 

A

UTHENTICATION 

C

ONTROL 

C

OMMANDS

 

The TACACS / XTACACS /  / RADIUS commands let you secure access to the Switch using the TACACS / XTACACS / 
/ RADIUS protocols. When a user logs in to the Switch or tries to access the administrator level privilege, he or she is 
prompted for a password. If TACACS / XTACACS /  / RADIUS authentication is enabled on the Switch, it will contact a 
TACACS / XTACACS /  / RADIUS server to verify the user. If the user is verified, he or she is granted access to the 
Switch. 

There are currently three versions of the TACACS security protocol, each a separate entity. The Switch’s software supports the 
following versions of TACACS: 

•

 TACACS (Terminal Access Controller Access Control System) —Provides password checking and authentication, and 

notification of user actions for security purposes utilizing via one or more centralized TACACS servers, utilizing the UDP protocol 
for packet transmission. 

•

 Extended TACACS (XTACACS) — An extension of the TACACS protocol with the ability to provide more types of 

authentication requests and more types of response codes than TACACS. This protocol also uses UDP to transmit packets. 

•

  (Terminal Access Controller Access Control System plus) — Provides detailed access control for 

authentication for network devices.  is facilitated through Authentication commands via one or more centralized servers. 
The protocol encrypts all traffic between the Switch and the  daemon, using the TCP protocol to ensure 
reliable delivery. 

The Switch also supports the RADIUS protocol for authentication using the Access Authentication Control commands. RADIUS or 
Remote Authentication Dial In User Server also uses a remote server for authentication and can be responsible for receiving user 
connection requests, authenticating the user and returning all configuration information necessary for the client to deliver service 
through the user. RADIUS may be facilitated on this Switch using the commands listed in this section. 

In order for the TACACS / XTACACS /  / RADIUS security function to work properly, a TACACS / XTACACS / 
 / RADIUS server must be configured on a device other than the Switch, called a 

server host

 and it must include 

usernames and passwords for authentication. When the user is prompted by the Switch to enter usernames and passwords for 
authentication, the Switch contacts the TACACS / XTACACS / / RADIUS server to verify, and the server will respond 
with one of three messages: 

A)

 

The server verifies the username and password, and the user is granted normal user privileges on the Switch.  

B)

 

The server will not accept the username and password and the user is denied access to the Switch. 

C)

 

The server doesn’t respond to the verification query. At this point, the Switch receives the timeout from the server and then 
moves to the next method of verification configured in the method list. 

The Switch has four built-in 

server groups

, one for each of the TACACS, XTACACS,  and RADIUS protocols. These 

built-in 

server groups

 are used to authenticate users trying to access the Switch. The users will set 

server hosts

 in a preferable order in 

the built-in 

server

 

group

 and when a user tries to gain access to the Switch, the Switch will ask the first 

server host

 for authentication. 

If no authentication is made, the second 

server host

 in the list will be queried, and so on. The built-in 

server group

 can only have 

hosts that are running the specified protocol. For example, the TACACS 

server group

 can only have TACACS 

server hosts

. 

The administrator for the Switch may set up five different authentication techniques per user-defined 

method list

 (TACACS / 

XTACACS /  / RADIUS / local / none) for authentication. These techniques will be listed in an order preferable, and 
defined by the user for normal user authentication on the Switch, and may contain up to eight authentication techniques. When a user 
attempts to access the Switch, the Switch will select the first technique listed for authentication. If the first technique goes through its 

server hosts 

and no authentication is returned, the Switch will then go to the next technique listed in the server group for 

authentication, until the authentication has been verified or denied, or the list is exhausted. 

Please note that when the user logins to the device successfully through 

頁

: 252 

TACACS / XTACACS / server or none method, the “user” priviledge level is the only level assigned. If the user wants to 
get the administration privilege level, the user must use the “enable admin” command to promote his privilege level. However when 
the user logins to the device successfully through the RADIUS server or through the local method, 3 kinds of privilege levels can be 
assigned to the user and the user can not use the “enable admin” command to promote to the admin privilege level.   

If the user has configured the user priviledge attribute of the RADIUS server (example: User A admin level) and the login is 
successful the device will assign the correct priviledge level (according to the RADIUS server) to the user.  However if the user does 
not configure the user priviledge attribute and logins successfully, the device will assign the “user level” to this user.  When assigning 
the levels 

3

 is used for the user level, 

4

 is used for the operator level and 

5

 is used for the administrator level. 

 

Содержание DES-3828 - xStack Switch - Stackable





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3828 - xStack Switch - Stackable

Black Box LT2060A Manual preview
LT2060A
Бренд: Black Box Страницы: 37
US Robotics USR8700 Quick Installation Manual preview
USR8700
Бренд: US Robotics Страницы: 36
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Бренд: National Instruments Страницы: 36
B&B Electronics 232CC1A Product Information preview
232CC1A
Бренд: B&B Electronics Страницы: 2
Selta Alyseo 106 User Manual preview
Alyseo 106
Бренд: Selta Страницы: 83
Abocom WR5502 User Manual preview
WR5502
Бренд: Abocom Страницы: 63
Magma ExpressBox2 EB2 User Manual preview
ExpressBox2 EB2
Бренд: Magma Страницы: 74
XtendLan XL-HCW224C User Manual preview
XL-HCW224C
Бренд: XtendLan Страницы: 52
PaloAlto Networks ION 1000 Hardware Reference Manual preview
ION 1000
Бренд: PaloAlto Networks Страницы: 28
Dataprobe iBoot Instruction Manual preview
iBoot
Бренд: Dataprobe Страницы: 16
NETGEAR ReadyNAS 3220 Series Datasheet preview
ReadyNAS 3220 Series
Бренд: NETGEAR Страницы: 4
Sun Microsystems McDATA Eclipse 1620 Release Notes preview
McDATA Eclipse 1620
Бренд: Sun Microsystems Страницы: 9
ACTi GNR-410 Quick Installation Manual preview
GNR-410
Бренд: ACTi Страницы: 12
METREL A 1475 Instruction Manual preview
A 1475
Бренд: METREL Страницы: 21
Westermo LRW-112 Series Manual preview
LRW-112 Series
Бренд: Westermo Страницы: 28
qpcom QP-S108 User Manual preview
QP-S108
Бренд: qpcom Страницы: 4
SEOWON INTECH SWC-2100 (VoIP CPE) User Manual preview
SWC-2100 (VoIP CPE)
Бренд: SEOWON INTECH Страницы: 46
3Egreen CM01-01 Instructions For Use Manual preview
CM01-01
Бренд: 3Egreen Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды