manualshive.com logo in svg

D-Link DES-3828 - xStack Switch - Stackable, Руководство CLI

Многофункциональный коммутатор D-Link DES-3828 - управляемый и стекируемый. Он обеспечивает высокую производительность и надежность сети. Чтобы узнать больше о спецификациях продукта, а также скачать бесплатное руководство по эксплуатации, посетите manualshive.com для загрузки документации.

Поделиться
Скачать
background image

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual

 

 

153

config access_profile profile_id (IP) 

•

 

dst_port <value 0-65535> 

−

 Specifies that the access profile will apply only 

to packets that have this UDP destination port in their header. 

•

 

protocol_id <value 0-255> 

−

 Specifies that the Switch will examine the Protocol 

field in each packet and if this field contains the value entered here, apply the 
appropriate rules. 

•

 

user_define <hex 0x0-0xfffffff>

 

−

 Enter a hexidecimal value that will identify 

the protocol to be discovered in the packet header. 

port <portlist>

 - The access profile for IP may be defined for each port on the Switch. 

Up to 65535 rules may be configured for each port.  

permit

 – Specifies that packets that match the access profile are permitted to be 

forwarded by the Switch. 

•

 

priority <value 0-7> 

−

 This parameter is specified to re-write the 802.1p default 

priority previously set in the Switch, which is used to determine to which CoS 
queue packets are forwarded. Once this field is specified, packets accepted by 
the Switch that match this priority are forwarded to the CoS queue specified 
previously by the user. 

•

 

{replace_priority} 

−

 Enter this parameter to re-write the 802.1p default priority of 

a packet to the value entered in the Priority field, which meets the criteria 
specified previously in this command, before forwarding it on to the specified 
CoS queue. Otherwise, a packet will have its incoming 802.1p user priority re-
written to its original value before being forwarded by the Switch. 

replace_dscp <value 0-63>

 

−

 Allows you to specify a value to be written to the DSCP 

field of an incoming packet that meets the criteria specified in the first part of the 
command. This value will over-write the value in the DSCP field of the packet. 

deny 

– Specifies that packets that match the access profile are not permitted to be 

forwarded by the Switch and will be filtered. 

mirror 

- Selecting

 mirror

 specifies that packets that match the access profile are 

mirrored to a port defined in the 

config mirror port 

command. Port Mirroring must 

be enabled and a target port must be set. Remember, Port Mirroring cannot cross-
box, that is they cannot span across switches in a switch stack. 

delete access_id <value 1-65535>

 

−

 Use this command to delete a specific rule from 

the IP profile. Up to 65535 rules may be specified for the IP access profile. 

Restrictions 

Only Administrator or Operator-level users can issue this command. 

Example usage: 

To configure a rule for the IP access profile: 

DES-3800:admin#config access_profile profile_id 2 add 
access_id 2 ip protocol_id 2 port 1 deny 

Command: config access_profile profile_id 2 add 
access_id 2 ip protocol_id 2 port 1 deny 
 
Success. 
 

DES-3800:admin# 

 

create access_profile (packet content mask) 

Purpose 

Used to create an access profile on the Switch by examining the Ethernet part of the 
packet header. Packet content masks entered will specify certain bytes of the packet 
header to be identified by the Switch. When the Switch recognizes a packet with the 
identical byte as the one configured, it will either forward, filter or mirror the packet, 
based on the users command. Specific values for the rules are entered using the

 

config access_profile 

command, below. 

Syntax 

create access_profile packet_content_mask {offset_0-15 <hex 0x0-0xffffffff> 

Содержание DES-3828 - xStack Switch - Stackable





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3828 - xStack Switch - Stackable

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Бренд: D-Link Страницы: 267
D-Link xStack Storage DSN-4000 Series Datasheet preview
xStack Storage DSN-4000 Series
Бренд: D-Link Страницы: 5
NEC Express5800/E120d-M Getting Started preview
Express5800/E120d-M
Бренд: NEC Страницы: 2
B+B SmartWorx UR5i v2 Libratum Start Manual preview
UR5i v2 Libratum
Бренд: B+B SmartWorx Страницы: 8
B+B SmartWorx ICR-1601 Start Manual preview
ICR-1601
Бренд: B+B SmartWorx Страницы: 8
Lanpro LP-N24 Installation Instructions preview
LP-N24
Бренд: Lanpro Страницы: 5
TFortis Teleport-1 Configuration Manual preview
Teleport-1
Бренд: TFortis Страницы: 86
Allied Telesis AT-9424Ts/XP AC Datasheet preview
AT-9424Ts/XP AC
Бренд: Allied Telesis Страницы: 3
KEMP Technologies LoadMaster 1500 Installation And Configuration Manual preview
LoadMaster 1500
Бренд: KEMP Technologies Страницы: 71
H3C CR1606-F Installation Instructions Manual preview
CR1606-F
Бренд: H3C Страницы: 12
Net to Net Technologies UIM-1000T Installation Instructions preview
UIM-1000T
Бренд: Net to Net Technologies Страницы: 4
TwinMOS Octopus G Series User Manual preview
Octopus G Series
Бренд: TwinMOS Страницы: 29
QTech QSW-2900 User Manual preview
QSW-2900
Бренд: QTech Страницы: 406
Bdcom GP3600-16 Hardware Installation Manual preview
GP3600-16
Бренд: Bdcom Страницы: 25
TRENDnet TS-U100 - NAS Server - USB User Manual preview
TS-U100 - NAS Server - USB
Бренд: TRENDnet Страницы: 47
ADTRAN NetVanta 1224R Specifications preview
NetVanta 1224R
Бренд: ADTRAN Страницы: 4
Planet VR-300 Series User Manual preview
VR-300 Series
Бренд: Planet Страницы: 136
3Com X5 Quick Start preview
X5
Бренд: 3Com Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды