D-Link DES-3326SRM, Руководство по эксплуатации продукта

Страница: 23 / 242

D-Link DES-3326S Layer 3 Switch
DES-332GS 1-port GBIC-Based Gigabit Ethernet Switch and stacking Module
Figure 1 - 12. Stacking Module with one GBIC port
Port Functions
•
1 GBIC-Based Gigabit Ethernet port
•
Allows multi-mode fiber optic connections of up to 550 m (SX and LX) and single-mode fiber optic
connections of up to 5 km (LX only). GBIC modules are available in –SX and –LX fiber optic media.
•
IEEE 802.3z 1000BASE-SX compliance
•
Supports Full-duplex operations
•
IEEE 802.3x compliant Flow Control support for full-duplex
Stacking Port Function
•
1 transmitting port and 1 receiving port
•
IEEE1394.b compliance
•
Forwarding rate up to 965Mbps
DEM-320GS 1-port GBIC-Based Gigabit Ethernet Switch and stacking Module
Port Functions
•
1 GBIC-Based Gigabit Ethernet port
•
Allows multi-mode fiber optic connections of up to 550 m (SX and LX) and single-mode fiber optic
connections of up to 5 km (LX only). GBIC modules are available in –SX and –LX fiber optic media.
•
IEEE 802.3z 1000BASE-SX compliance
•
Supports Full-duplex operations
•
IEEE 802.3x compliant Flow Control support for full-duplex
The optional Stacking Module allows up to eight DES-3326S
Switches to be interconnected via their individual stacking
modules. This forms an eight-Switch stack that can then be
managed and configured as thought the entire stack were a single
Switch. The Switch stack is then accessed through a single IP
address or alternatively, through the master Switch’s serial port
(via the management station’s console and the Switch’s
Command Line Interface).
The stacking ports are marked IN and OUT . The IEEE 1394
compliant cable must be connected from an IN port on one
Switch to an OUT port on the next Switch in the stack. The
last two Switches (at the top and bottom of the stack) must
also be connected from the
IN port on one Switch to the OUT
port on the other Switch. In this way, a loop is made such that
all of the Switches in the Switch stack have the
IN stacking
port connected to another Switch’s OUT stacking port.
Stacking Port Function
•
1 transmitting port and 1 receiving port
•
IEEE1394.b compliance
•
Forwarding rate up to 965Mbps
LED Indicators*
Link Off – No Link
Solid Green – Link
Active Off – No Activity
Blinking Green – Activity
*See Stacking LED Indicators on for details on the stacking port display.
13