D-Link DES-3226L, Руководство пользователя

Страница: 52 / 134

DES-3226L Layer 2 Fast Ethernet Switch User’s Guide
Figure 5-19. SNMP Host Table – Add window
The following parameters can be set:
Parameter Description
IP Address Type the IP address of the remote management station that will serve as
the SNMP host for the Switch.
SNMP Version
V1 – To specify that SNMP version 1 will be used.
V2c – To specify that SNMP V2c version will be used.
V3 – NoAuth –NoPriv – To specify that SNMP version 3 will be used, with
the NoAuth-NoPriv security level.
V3 – Auth - NoPriv -To specify that the SNMP version 3 will be used, with
the Auth-NoPriv security level.
V3 – Auth - Priv -To specify that the SNMP version 3 will be used, with the
Auth-Priv security level.
Community String or
SNMP V3 User Name Type in the community string or SNMP V3 user name as appropriate.
SNMP Engine ID
The Engine ID is a unique identifier used for SNMP V3 implementations. This is an
alphanumeric string used to identify the SNMP engine on the switch.
To display the switch’s SNMP Engine ID, open the Basic Setup folder to Network
Management , and then the SNMPV3 folder. Finally, click on the Engine ID link. This will
open the SNMP Engine ID Configuration page, as shown below.
Figure 5-20. Engine ID window
To change the Engine ID , type the new Engine ID in the space provided and click the Apply
button.
40