D-Link DES-3226L, Руководство пользователя

Страница: 33 / 134

DES-3226L Layer 2 Fast Ethernet Switch User’s Guide
Figure 4-4. Assigning the Switch an IP Address
In the above example, the Switch was assigned an IP address of 10.53.13.175 with a subnet
mask of 255.0.0.0. The system message
Success indicates that the command was executed
successfully. The Switch can now be configured and managed via Telnet and the CLI or via
the Web-based management.
Connecting Devices to the Switch
After you assign IP addresses to the Switch, you can connect devices to the Switch.
To connect a device to an SFP transceiver port:
1. Use your cabling requirements to select an appropriate SFP transceiver type.
2. Insert the SFP transceiver (sold separately) into the SFP transceiver slot.
3. Use the appropriate network cabling to connect a device to the connectors on the SFP
transceiver.
NOTICE: When the SFP transceiver acquires a link, the associated
integrated 10/100/1000BASE-T port is disabled.
21