manualshive.com logo in svg

D-Link DES-3010FA, Руководство CLI

Поделиться
Скачать
D-Link DES-3010FA Скачать руководство пользователя страница 314

D-Link DES-3010FA/GA/PA CLI Reference Guide

 

Page 313 

ip internal-usage-vlan

The 

ip internal-usage-vlan

 Interface Configuration mode command reserves a VLAN as the internal usage 

VLAN of an interface. To return to the default configuration, use the 

no

 form of this command.

Syntax

ip internal-usage-vlan

 

vlan-id

no ip internal-usage-vlan

Parameters
•

vlan-id

 — Specifies the ID of the internal usage VLAN.

Default Configuration

The software reserves a VLAN as the internal usage VLAN of an interface.

Command Mode 

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

An internal usage VLAN is required when an IP interface is configured on an Ethernet port or port-channel.

This command enables the user to configure the internal usage VLAN of a port. If an internal usage VLAN is not 
configured and the user wants to configure an IP interface, an unused VLAN is selected by the software.

If the software selected a VLAN for internal use and the user wants to use that VLAN as a static or dynamic VLAN, 
the user should do one of the following:

•

Remove the IP interface.

•

Create the VLAN and recreate the IP interface.

•

Use this command to explicitly configure a different VLAN as the internal usage VLAN.

Example

The following example reserves an unused VLAN as the internal usage VLAN of ethernet port 7.

Console# 

config

Console(config)# 

interface ethernet

 7

Console(config-if)# 

ip internal-usage-vlan 2

Содержание DES-3010FA










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды