manualshive.com logo in svg

D-Link DES-3010FA, Руководство CLI

Поделиться
Скачать
D-Link DES-3010FA Скачать руководство пользователя страница 117

IP Addressing Commands

 Page 116 

ip address dhcp

The 

ip address dhcp 

Interface Configuration (Ethernet, VLAN, port-channel) mode command acquires an IP 

address for an Ethernet interface from the Dynamic Host Configuration Protocol (DHCP) server. To deconfigure an 
acquired IP address, use the 

no

 form of this command.

Syntax

ip address dhcp

 [

hostname

 

host-name

]

no ip address dhcp

Parameters
•

host-name

 — Specifies the name of the host to be placed in the DHCP option 12 field. This name does not 

have to be the same as the host name specified in the 

hostname

 Global Configuration mode command. 

(Range: 1-20 characters)

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet, VLAN, port-channel) mode

User Guidelines

The 

ip address dhcp

 command allows any interface to dynamically learn its IP address by using the DHCP pro-

tocol. 

Some DHCP servers require that the DHCPDISCOVER message have a specific host name. The 

ip address 

dhcp

 

hostname

 

host-name

 command is most typically used when the host name is provided by the system 

administrator.

If the device is configured to obtain its IP address from a DHCP server, it sends a DHCPDISCOVER message to 
provide information about itself to the DHCP server on the network.

If the 

ip address dhcp

 command is used with or without the optional keyword, the DHCP option 12 field (host 

name option) is included in the DISCOVER message. By default, the specified DHCP host name is the globally 
configured host name of the device. However, the 

ip address dhcp hostname

 

host-name

 command can be used 

to place a different host name in the DHCP option 12 field.

The 

no ip address dhcp

 command deconfigures any IP address that was acquired, thus sending a DHCPRE-

LEASE message. 

Example

The following example acquires an IP address for Ethernet port 4 from DHCP.

Console(config)# 

interface ethernet

 4

Console(config-if)# 

ip address dhcp

Содержание DES-3010FA










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды